2024 TOYOTA TUNDRA

EQUIPMENT:OTHER:LABELS

Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia

BACK OVER PREVENTION:SOFTWARE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with

POWER TRAIN:AUTOMATIC TRANSMISSION

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.

TIRES:SIDEWALL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Sequoia Hybrid, Tundra and Tundra Hybrid vehicles. The passenger-side front and rear tires may have inner sidewall damage, which can cause a sudden loss of tire pressure.

EXTERIOR LIGHTING:BACK UP LIGHTS

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.

EQUIPMENT:OTHER:LABELS

Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Fede

ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall

BACK OVER PREVENTION:SOFTWARE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requireme

I am an automotive engineer. I have been involved with vehicle development programs in the disabled vehicle conversion community for over two decades and have numerous patents in that space. I have been involved with vehicle testing and calibration as well. My vehicle demonstrates a SIGNIFICANT HESITATION when the accelerator is pressed that is not consistent. I live in a roundabout dense location where timing an entry into a roundabout is easy using a normal vehicle. The 1 to 2 second hesitation where there is throttle input and no action at all from the vehicle (engine does not rev, no motive power observed) is very dangerous. I took this up with Toyota and my vehicle was checked out and "learning transmission" memory was wiped clean with me being the only driver was the remedy. The issue got better for a short time but is back and this morning I pulled out thinking there was plenty of time in front of a bus a good distance away and the lack of motive power for a full second o

I am an automotive engineer. I have been involved with vehicle development programs in the disabled vehicle conversion community for over two decades and have numerous patents in that space. I have been involved with vehicle testing and calibration as well. My vehicle demonstrates a SIGNIFICANT HESITATION when the accelerator is pressed that is not consistent. I live in a roundabout dense location where timing an entry into a roundabout is easy using a normal vehicle. The 1 to 2 second hesitation where there is throttle input and no action at all from the vehicle (engine does not rev, no motive power observed) is very dangerous. I took this up with Toyota and my vehicle was checked out and "learning transmission" memory was wiped clean with me being the only driver was the remedy. The issue got better for a short time but is back and this morning I pulled out thinking there was plenty of time in front of a bus a good distance away and the lack of motive power for a full second o

My 2024 Toyota Tundra imax hybrid started off with a knocking sound. I took it into a certified Toyota dealership to have it inspected. I was then told that they had ordered a part it needed to fix the problem. After not hearing back and the knocking getting louder. I reached back out and took it back for further inspection. They then told me that it needed a system update. After running the update, a couple of times later after diving the Tundra, it had a power issue when pushing the gas to accelerate. I then reached out to Toyota once again and took it back to be serviced. They told me that they test drove my truck and had no issues with acceleration. So I went and picked it up. Just a couple days after receiving my truck back, I was at an intersection with the blinking turn signal and attempted to take off when the truck completely stalled out. I had two cars almost crash into me, but barely missed! I started the truck back and went directly home. I then told Toyota about the situat

The contact owns a 2024 Toyota Tundra. The contact received notifications of NHTSA Campaign Numbers: 25V322000 (Exterior Lighting), 25V767000 (Engine and Engine Cooling), and 26V038000 (Back Over Prevention); however, the parts to do the recall repairs were not yet available. The contact stated that while driving approximately 10-15 MPH, the vehicle experienced reduced engine power. The contact stated that while driving from a complete stop in the middle of an intersection, the vehicle stalled, almost causing another vehicle to crash into the vehicle. The contact was unable to pull over to the side of the road. There was no warning light illuminated. The contact was able to restart the vehicle and resumed driving. The contact stated that the failure had occurred on several occasions. The vehicle was taken to the dealer, where it was diagnosed and determined that the engine had failed and needed to be replaced; however, the part to perform the recall repair for NHTSA Campaign Number: 25

Mileage: 36,500

The contact owns a 2024 Toyota Tundra. The contact stated that while driving approximately 45 MPH, the vehicle went into LIMP Mode and failed to accelerate. The contact stated that the messages “Engine Power Reduced” and “Support Brake Malfunction” were displayed. The vehicle was able to restart. The contact stated that while driving approximately 45 MPH, the message “Malfunction with Throttle/Engine/Powertrain” was displayed. The vehicle was towed to the dealer, where it was diagnosed and determined that the vehicle had experienced a low-voltage failure and needed to be repaired. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer, where it was diagnosed that the computer software had failed, and a software update was needed. The contact received notification of NHTSA Campaign Numbers: 26V038000 (Back Over Prevention), 25V322000 (Exterior Lighting), and 25V767000 (Engine and Engine Cooling); however, the parts for the recall re

Mileage: 7,278

The contact owns a 2024 Toyota Tundra. The contact stated that while driving approximately 45 MPH, the vehicle went into LIMP Mode and failed to accelerate. The contact stated that the messages “Engine Power Reduced” and “Support Brake Malfunction” were displayed. The vehicle was able to restart. The contact stated that while driving approximately 45 MPH, the message “Malfunction with Throttle/Engine/Powertrain” was displayed. The vehicle was towed to the dealer, where it was diagnosed and determined that the vehicle had experienced a low-voltage failure and needed to be repaired. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer, where it was diagnosed that the computer software had failed, and a software update was needed. The contact received notification of NHTSA Campaign Numbers: 26V038000 (Back Over Prevention), 25V322000 (Exterior Lighting), and 25V767000 (Engine and Engine Cooling); however, the parts for the recall re

Mileage: 7,278

The contact owns a 2024 Toyota Tundra. The contact stated that while driving approximately 45 MPH, the vehicle went into LIMP Mode and failed to accelerate. The contact stated that the messages “Engine Power Reduced” and “Support Brake Malfunction” were displayed. The vehicle was able to restart. The contact stated that while driving approximately 45 MPH, the message “Malfunction with Throttle/Engine/Powertrain” was displayed. The vehicle was towed to the dealer, where it was diagnosed and determined that the vehicle had experienced a low-voltage failure and needed to be repaired. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer, where it was diagnosed that the computer software had failed, and a software update was needed. The contact received notification of NHTSA Campaign Numbers: 26V038000 (Back Over Prevention), 25V322000 (Exterior Lighting), and 25V767000 (Engine and Engine Cooling); however, the parts for the recall re

Mileage: 7,278

NHTSA 25V322 indicates potential issue with reverse lamp assemblies as well as the remedy. Recall Status indicates "remedy not yet available". It has been over 6 months (5/15/25 to 2/9/26) since this safety recall was filed. This has been an unreasonably long time and Toyota should be compelled to initiate the remedy immediately and provide a detailed explanation as to why it is failing to meet its own code of conduct with respect to product safety and the law.

The engine repair was a short block only, even thoe the main bearings spun and sent debis threw the engine. #1 rod went as well. Apon recieving the truck back, with in 200 miles, I've had the same hesitation with the engines as I had just before the first engine failed. Took it by the dealer and no issues found. oil preasure stays up and temp normal. I've had many issue with throtle lag sence day one. The milage has stayed in the low 11 gpm when before i would get on average 14 to 16. Dealer stated toyota would make it right if the engine fails again. Very unhappy with Toyota as I feel they are just kicking the can down the road.

The engine repair was a short block only, even thoe the main bearings spun and sent debis threw the engine. #1 rod went as well. Apon recieving the truck back, with in 200 miles, I've had the same hesitation with the engines as I had just before the first engine failed. Took it by the dealer and no issues found. oil preasure stays up and temp normal. I've had many issue with throtle lag sence day one. The milage has stayed in the low 11 gpm when before i would get on average 14 to 16. Dealer stated toyota would make it right if the engine fails again. Very unhappy with Toyota as I feel they are just kicking the can down the road.

The engine repair was a short block only, even thoe the main bearings spun and sent debis threw the engine. #1 rod went as well. Apon recieving the truck back, with in 200 miles, I've had the same hesitation with the engines as I had just before the first engine failed. Took it by the dealer and no issues found. oil preasure stays up and temp normal. I've had many issue with throtle lag sence day one. The milage has stayed in the low 11 gpm when before i would get on average 14 to 16. Dealer stated toyota would make it right if the engine fails again. Very unhappy with Toyota as I feel they are just kicking the can down the road.

The contact owns a 2024 Toyota Tundra. The contact stated that while driving at an undisclosed speed, the low engine oil warning light illuminated. The vehicle independently switched to Hybrid. The vehicle was driven to the shoulder of the road, and the engine seized. The vehicle was towed to the dealer where it was diagnosed with engine failure. The contact was informed that the engine had experienced oil starvation, causing the rod bearings and engine failure. The contact was informed that the engine needed to be rebuilt or replaced. The engine was being rebuilt but was not yet repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 44,186.

Mileage: 44,186

Throttle lag, takes a couple of seconds for the truck to register me pressing on the gas before jolting forward. Not only frustrating but dangerous.

Throttle lag, takes a couple of seconds for the truck to register me pressing on the gas before jolting forward. Not only frustrating but dangerous.

Throttle lag, takes a couple of seconds for the truck to register me pressing on the gas before jolting forward. Not only frustrating but dangerous.

As I was drive home at 45 mph the vehicle started surging and then the engine started knocking. then I stopped the vehicle and called Toyota for a tow. The truck was towed to the local dealer (Sheehy Toyota) for inspection. upon inspection the motor has a bad knocking in the lower end of the engine. The truck is now in the shop getting the engine disassembled. believed to be a main bearing failure. The truck has 9,229 miles on it. light use and had the oil changed 500 miles prior by the dealer.

The contact received a recall on the 2024 Toyota Tundra; however, the contact did not own the vehicle. The contact received notification of NHTSA Campaign Number: 25V767000 (ENGINE AND ENGINE COOLING); and requested to be removed from the recall distribution list. The local dealer and manufacturer were contacted.

Numerous times (4-5) the truck has failed to accelerate from a rolling stop and/or a full stop. One time recently, I stopped and quickly tried to turn left onto another road. As I accelerated, the engine lagged and the truck felt as if it would stall. In all instances, the transmission seems as if it has not downshifted into 1st gear... and appears as if it is stuck in 3rd or 4th gear and the engine struggles to keep up. No warning lights or messages appeared in any of the instances. I am taking it to the dealer for them to look at.

I was at a stop sign making a left turn across four lanes of travel. I had a gap in traffic with ample time to make the left turn so I pressed on the gas pedal to begin the turn. The vehicle did not move forward upon me pressing the gas pedal. After about one second the vehicle finally moved. At that point cross traffic was closing in so I pressed the gas pedal to the floor. The vehicle lurched forward and the rear end broke loose causing me to fishtail the vehicle while making the turn. This delay in acceleration put me and my family at risk of being struck by oncoming traffic. The delay in acceleration caused me to mismanage the throttle sending the vehicle into an out of control turn which could have resulted in a crash had I not been able to regain control. I presented this information to the dealership mechanic and they told me that’s just how the gas pedals work in the tundra. That is not an acceptable answer. I paid too much for this vehicle for it to not be safe to drive.

Purchased new in 2024. since ownership, Ive experienced throttle lag. Especially from the stopped position. I have also experienced occasional stalling for no apparent reason. Dealership has noted issues I have mentioned. vehicle now has 32000 miles and issues continue .Delaership has been unable to remedy either situation