2010 FORD ESCAPE

STEERING:ELECTRIC POWER ASSIST SYSTEM

Ford Motor Company (Ford) is recalling certain model year 2008-2011 Ford Escape and Mercury Mariner vehicles manufactured August 18, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Ford Motor Company (Ford) is recalling certain model year 2010-2012 Ford Escape vehicles manufactured February 26, 2009, to April 29, 2012, and 2010-2011 Mercury Mariner vehicles manufactured February 25, 2009, to December 12, 2010. On vehicles with a 3.0L engine, the Fuel Delivery Module (FDM) may

POWER TRAIN:AUTOMATIC TRANSMISSION

FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, MILAN, AND ESCAPE VEHICLES MANUFACTURED FROM FEBRUARY 27, THROUGH MARCH 26, 2010. THE PARK ROD GUIDE RETENTION PIN MAY NOT HAVE BEEN PROPERLY INSTALLED WHICH FAILS TO CONFORM TO THE REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEF

EQUIPMENT

MARATHON IS RECALLING CERTAIN SEAT COVERS, BRAND SUPERHIDES WITH PART NUMBERS 593, 594, 578, 960, 228, 228-09, 267-08, 333, 625, AND 630, SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE SEAT COVERS ARE MADE OF HEAVIER THREAD AND ARE NOT COMPATIBLE WITH SEATS CONTAINING S

SUSPENSION:FRONT:WHEEL BEARING

The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have

The steering angle sensor failed. My mechanic replaced it. I do not know if the part is still available for inspection. The safety of those in the vehicle as well as any around it were in jeopardy when the incident occurred. Thankfully no one was injured nor was there any collision for further vehicle damage. While the vehicle was running, suddenly the steering wheel whipped to the left. The vehicle was in motion when this occurred, causing the vehicle to turn further than intended, and requiring substantial strength to re-direct the vehicle under the driver's (and passenger's) guidance. As long as the vehicle was running, the power steering pulled the wheel to the most extreme left. The mechanic confirmed that the steering angle sensor was the issue and replaced it. I was able to reproduce the steering moving itself (the steering wheel, and front tire) left, when the engine was engaged. With the vehicle off, I was able to maneuver the tires left and right. But when I turned on

Ford 2010 escape Power assist steering fault- torque sensor needs replacement at only 92,000 miles. My steering wheel became loose and shaking aggressively while driving and at idle causing serious safety and control concerns. The steering wheel has also become very hard to turn. Ford dealer ran a diagnostic and confirmed the issue. This is the exact same issue that has been recalled on other 2010 Ford escapes.

Took the car into a mechanic for shaking in the steering wheel while driving and shaking/ grinding noise coming from steering wheel while car is idle. Mechanics confirmed it is a power steering assist fault. This causes a safety concern when driving due to a possible loss of steering and harder to control.

The power system assist fault light came on and steering is very difficult

The power system assist fault light came on and steering is very difficult

The power system assist fault light came on and steering is very difficult

The contact owns a 2010 Ford Escape. The contact stated that while driving approximately 55 MPH, the contact attempted to turn the steering wheel to the right to exit the highway, the contact was unable to turn the steering wheel. There was no warning light illuminated. The contact stopped the vehicle and turned off the vehicle and restarted the vehicle to reset the power steering. The contact stated that the steering wheel was difficult to turn to the left or the right. The contact researched online and related the failure to NHTSA Campaign Number: 14V284000 (Steering). The contact had taken the vehicle to a local dealer where it was diagnosed and determined that the power steering assist had failed and needed to be replaced. The contact advised the dealer that there was a recall for the year, make and model. The contact was advised by the dealer that the VIN was not under recall. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was u

Electric Power Steering system failure related to the torque sensor. An unexpected loss of steering while driving. I was driving on the I95 on my way to work when all of a sudden I lost the ability to steer the car. It took all the strength I had to pull over to the shoulder before the car behind me swerved in the nick of time to avoid a collision. It was very scary. I turned the engine off gathered myself and turned the engine back on and the power steering returned. I exited the highway as soon as possible and drove to the mechanic. He ran a test on the car and the code came up for the recall for the electric power steering system failure which is a recall.

Bout the vehicle from a used car dealership in Victorville and in 22 days the truck valve body gave out in the middle of me driving almost causing a car accident on freeway. The solenoid D is stuck in off and the transmission on this model is known to do this I need help or some answers

Bout the vehicle from a used car dealership in Victorville and in 22 days the truck valve body gave out in the middle of me driving almost causing a car accident on freeway. The solenoid D is stuck in off and the transmission on this model is known to do this I need help or some answers

Bout the vehicle from a used car dealership in Victorville and in 22 days the truck valve body gave out in the middle of me driving almost causing a car accident on freeway. The solenoid D is stuck in off and the transmission on this model is known to do this I need help or some answers

The contact owns a 2010 Ford Escape. The contact stated that upon starting the vehicle, the steering wheel violently drifted to the left, and the contact lost control of the vehicle. There was no warning light illuminated. Due to the failure, the contact used excessive force to steer the vehicle. Prior to the failure, the independent mechanic informed the contact that the same failure had occurred after the tie rod ends were replaced. The vehicle was taken back to the independent mechanic, who then had the vehicle towed to the dealer. The vehicle was diagnosed with a defective steering column. The vehicle was included in NHTSA Campaign Number: 14V284000 (Steering); however, the recall was not related to the steering column failure. The vehicle was not repaired. The failure mileage was 125,365

Mileage: 125,365

There is oil leak that cannot be found. I have taken that truck to 3 different mechanics, conducted 3 different diagnostics using the dye and everything and the source of this leak cannot be found and is causing me problems.

There is oil leak that cannot be found. I have taken that truck to 3 different mechanics, conducted 3 different diagnostics using the dye and everything and the source of this leak cannot be found and is causing me problems.

concerns regarding my 2010 Ford Escape. Within thirty (30) days of purchase, the transmission completely failed, rendering the vehicle inoperable. Additionally, upon further inspection, it was discovered that the entire underbody of the vehicle is severely rusted and corroded. This corrosion appears extensive enough to compromise the structural integrity of the frame and essential safety components. While operating the vehicle prior to transmission failure, I also experienced significant shaking and vibration during both driving and braking. These issues raise major safety concerns, as they could indicate underlying brake, suspension, or frame instability. Given the combination of a failed transmission, extensive underbody rust, and unsafe driving behavior, I believe this vehicle may present a serious risk to myself and others on the road. These types of defects and corrosion levels are unusual for a vehicle of this make and model and could point to a broader safety or manufacturing

concerns regarding my 2010 Ford Escape. Within thirty (30) days of purchase, the transmission completely failed, rendering the vehicle inoperable. Additionally, upon further inspection, it was discovered that the entire underbody of the vehicle is severely rusted and corroded. This corrosion appears extensive enough to compromise the structural integrity of the frame and essential safety components. While operating the vehicle prior to transmission failure, I also experienced significant shaking and vibration during both driving and braking. These issues raise major safety concerns, as they could indicate underlying brake, suspension, or frame instability. Given the combination of a failed transmission, extensive underbody rust, and unsafe driving behavior, I believe this vehicle may present a serious risk to myself and others on the road. These types of defects and corrosion levels are unusual for a vehicle of this make and model and could point to a broader safety or manufacturing

concerns regarding my 2010 Ford Escape. Within thirty (30) days of purchase, the transmission completely failed, rendering the vehicle inoperable. Additionally, upon further inspection, it was discovered that the entire underbody of the vehicle is severely rusted and corroded. This corrosion appears extensive enough to compromise the structural integrity of the frame and essential safety components. While operating the vehicle prior to transmission failure, I also experienced significant shaking and vibration during both driving and braking. These issues raise major safety concerns, as they could indicate underlying brake, suspension, or frame instability. Given the combination of a failed transmission, extensive underbody rust, and unsafe driving behavior, I believe this vehicle may present a serious risk to myself and others on the road. These types of defects and corrosion levels are unusual for a vehicle of this make and model and could point to a broader safety or manufacturing

The contact owns a 2010 Ford Escape. While the contact’s wife was driving at an undisclosed speed, the vehicle lost power steering assist and was driven with manual steering. The message "Power Steering Assist Fault" was displayed. The vehicle was taken to an independent mechanic, who was unable to diagnose the vehicle. The vehicle was not diagnosed or repaired. The contact researched online and related the failure to NHTSA Campaign Number: 14V284000 (Steering) and contacted the dealer, and was informed that the VIN was not included in the recall. The manufacturer was not notified of the failure. The failure mileage was approximately 170,000

Mileage: 170,000

The power steering assist fault warning light came up and my steering wheel became hard to steer.

The power steering assist fault warning light came up and my steering wheel became hard to steer.