2019 DODGE JOURNEY

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Chrysler (FCA US, LLC) is recalling certain 2019-2021 Ram ProMaster and 2019-2020 Dodge Journey vehicles. Cracks in the microprocessor may cause the vehicle's rearview camera image not to display properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety S

The contact owns a 2019 Dodge Journey. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rearview camera displayed a distorted image, and the screen was blue or distorted. Several unknown warning lights were occasionally illuminated. Additionally, the instrument panel failed to display safety features as intended. The vehicle was taken to a local dealer; however, the vehicle was not repaired due to parts not being available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 72,000.

Mileage: 72,000

The contact owns a 2019 Dodge Journey. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was notified of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

Unknown it doesn't start and all lights flash on dash

The contact owns a 2019 Dodge Journey. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displayed a black image intermittently while in reverse(R). The vehicle was taken to an unknown dealer, where the contact was informed that the vehicle could not be repaired because parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 110,000.

Mileage: 110,000

About 50% of the time the Bluetooth in the car fails to initialize. I have to either turn the car off for about 5 minutes or pull the fuse for the radio in order to get Bluetooth to connect for hands free calling and Bluetooth music. I have the 8.4 inch uconnect radio without nav or the dvd player option.

About 50% of the time the Bluetooth in the car fails to initialize. I have to either turn the car off for about 5 minutes or pull the fuse for the radio in order to get Bluetooth to connect for hands free calling and Bluetooth music. I have the 8.4 inch uconnect radio without nav or the dvd player option.

I purchased my 2019 dodge journey in 2022 and about two months maybe after purchasing it, my backup camera went out. At first, it came in and out- only working occasionally. But then it completely stopped and hasn’t worked since. There’s a line through the image where the camera use to show up in the mirror. I understand some 2019 dodge journeys has recalls for this, but not my VIN. So I wanted to report that this one also has the same issue.

I purchased my 2019 dodge journey in 2022 and about two months maybe after purchasing it, my backup camera went out. At first, it came in and out- only working occasionally. But then it completely stopped and hasn’t worked since. There’s a line through the image where the camera use to show up in the mirror. I understand some 2019 dodge journeys has recalls for this, but not my VIN. So I wanted to report that this one also has the same issue.

The contact owns a 2019 Dodge Journey. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rearview camera was inoperable. The vehicle was taken to the dealer, where it was diagnosed with rearview camera failure. The dealer determined that the rear-view camera needed to be replaced. The vehicle was not repaired because the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. It was unknown whether the manufacturer was contacted. The failure mileage was approximately 83,000.

Mileage: 83,000

My back up camera went out November 2025 and does not work. Black screen. Lakeland Dodge Dealership refuses to fix for free and vehicle is not under current recall, although is a 2019 Dodge Journey GT. Safety issue and will be reported to National Road Safety Commission

My backup camera is showing a no camera symbol. At first the camera was showing an image upside down. Then the image was blurry and flashing. Now it isn't showing anything. I have looked it up and my year of my vehicle falls within the same issue other were recalled for but my VIN does not show up in the list.

The contact owns a 2019 Dodge Journey. The contact stated that while attempting to reverse, the rearview camera screen was blank. No warning light was illuminated. Neither an independent mechanic nor a dealer was contacted. The vehicle was not taken to the dealer or an independent mechanic for a diagnostic test. The vehicle was not repaired. The contact was relating the failure NHTSA Campaign Number: 25V552000 (BACK OVER APREVENTION); however, the VIN was not included in the recall. The manufacturer was not notified of the failure. The failure mileage was 100,000.

Mileage: 100,000

My rearview camera display will show and image at times. When putting car in reverse ans or drive the screen sometimes is blank.

The contact owns a 2019 Dodge Journey. The contact received notification of NHTSA Campaign Number: 25V552000 (BACK OVER PREVENTION); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

The contact owns a 2019 Dodge Journey. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while shifted to reverse(R), the back over prevention camera displayed the image upside down. The dealer was contacted and confirmed that the part was not yet available. The manufacturer was made aware of the issue. The failure mileage was approximately 30,000.

Mileage: 30,000

My windows won’t open up or close also my passenger door is the only one that can open and close the rest of the doors. My cruise control isn’t working, the back up camera isn’t working at all

My windows won’t open up or close also my passenger door is the only one that can open and close the rest of the doors. My cruise control isn’t working, the back up camera isn’t working at all

The cover for the seat belt and airbag on the front passenger seat have become disconnected without any incident causing such. Possibly not allowing the seat belt or airbag to function properly. Also the airbag sensor & seatbelt sensor for this seat stopped working at the same time the cover became un attached to the frame. It makes the seatbelt very hard to use and not sure it would function properly in a wreck not so I think the airbag would be able to deploy properly as the sensor is also not working. I was told this was not covered under my warranty.

The cover for the seat belt and airbag on the front passenger seat have become disconnected without any incident causing such. Possibly not allowing the seat belt or airbag to function properly. Also the airbag sensor & seatbelt sensor for this seat stopped working at the same time the cover became un attached to the frame. It makes the seatbelt very hard to use and not sure it would function properly in a wreck not so I think the airbag would be able to deploy properly as the sensor is also not working. I was told this was not covered under my warranty.

The cover for the seat belt and airbag on the front passenger seat have become disconnected without any incident causing such. Possibly not allowing the seat belt or airbag to function properly. Also the airbag sensor & seatbelt sensor for this seat stopped working at the same time the cover became un attached to the frame. It makes the seatbelt very hard to use and not sure it would function properly in a wreck not so I think the airbag would be able to deploy properly as the sensor is also not working. I was told this was not covered under my warranty.