Investigations

Brake Vacuum Pump Failure

NHTSA Preliminary Evaluation PE18012 — closed, opened 2018-11-20 and involving the CHEVROLET SILVERADO 1500.

PE18012 Preliminary Evaluation Closed

Vehicle: CHEVROLET SILVERADO 1500 View model page

NHTSA investigation PE18012 is a Preliminary Evaluation opened on 2018-11-20 and currently closed. The subject of record is CHEVROLET SILVERADO 1500, which places this file inside the Office of Defects Investigation queue for CHEVROLET. Latest activity on this investigation was logged on 2022-04-10 — NHTSA updates that field whenever an Information Request goes out, a supplement is filed, or a status change is recorded in the public docket.

A Preliminary Evaluation like PE18012 is the entry point of the federal defect-investigation process. NHTSA engineers scan complaint databases, field reports, and manufacturer data to decide whether an Engineering Analysis is warranted, whether a voluntary recall is already sufficient, or whether the pattern does not rise to a defect finding.

Investigators summarized the matter as follows: "On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the bra..." Investigations are the early-warning layer of the federal auto-safety system, sitting upstream of formal recalls and defect orders. Whether this one closes without action or escalates into an Engineering Analysis, the full history stays in the ODI archive so researchers, litigators, and buyers can pull the paper trail at any time. Related CHEVROLET files, listed below, give context on whether this is an isolated concern or part of a broader pattern across the brand.

Status
Closed
Type
Preliminary Evaluation
Opened
2018-11-20
Latest Activity
2022-04-10

Investigation Summary

On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, and GMC Yukon SUVs. If the brake assist vacuum pump fails to operate as intended, the amount of brake power assist supplied to the driver can be significantly reduced, extending the subject vehicle stopping distance. GM stated that the root cause of pump failures was due to foreign debris such as oil sludge in the engine oil. GM stated that this debris can become trapped by the oil inlet filter screen. Under normal operation, this screen allows a small amount of oil into the brake vacuum pump. The foreign debris can, over time, clog the pump which can cause a loss of lubrication and a reduction in the amount of vacuum produced leading to a hard pedal and extended stopping distance. On December 13, 2018, GM issued a Special Coverage (N182202780) for the brake vacuum pump issue in MY 2014-2017 trucks and 2015-2017 SUVs on the K2XX platform for 6 years or 72,000 miles. Special Coverage repair includes the replacement of the vacuum pump and vacuum pump belt. Consumers received notification of the coverage via mail. On September 6, 2019, GM notified NHTSA that it was conducting safety recall 19V-645 which reprograms the electronic brake control module (EBCM) and included approximately 3.5 million trucks and SUVs. In October 2019, GM extended the terms of special coverage N182202780 to 10 years or 150,000 miles as well as now including the entire scope of recall 19V-645. In October 2020, GM expanded the scope of coverage N182202780 to include the MY 2018 Escalade and 2019 Tahoe. The remedy implemented in GM recall 19V-645 appears to be sufficient in addr

About This Investigation Type

A Preliminary Evaluation (PE) is the first phase of NHTSA's investigation process. It is opened when the agency identifies a potential safety defect pattern, usually triggered by consumer complaints, manufacturer reports, or field monitoring. During a PE, NHTSA gathers information to determine whether a formal engineering analysis is warranted.

Other CHEVROLET Investigations

Data from NHTSA Office of Defects Investigation. Cross-references: NHTSA recall campaign API and NHTSA FARS where fatality records overlap. PlainCars does not rate or recommend vehicles. Learn more.