Investigations
DTN Air Bag Inflator Rupture
NHTSA Engineering Analysis EA25005 — open, opened 2025-10-21.
NHTSA investigation EA25005 is a Engineering Analysis opened on 2025-10-21 and currently open. The subject is tracked inside the Office of Defects Investigation queue. Latest activity on this investigation was logged on 2025-10-21 — NHTSA updates that field whenever an Information Request goes out, a supplement is filed, or a status change is recorded in the public docket.
An Engineering Analysis like EA25005 is the deeper technical phase that follows a PE. NHTSA requests design, warranty, and field-failure data from the manufacturer, conducts its own testing when needed, and determines whether the evidence supports a safety defect finding that would compel a recall.
Investigators summarized the matter as follows: "The Office of Defects Investigation (ODI) has become aware of eight vehicle crashes in which a rupture of a Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN) air bag inflator occurred during the deploymen..." Investigations are the early-warning layer of the federal auto-safety system, sitting upstream of formal recalls and defect orders. Whether this one closes without action or escalates into an Engineering Analysis, the full history stays in the ODI archive so researchers, litigators, and buyers can pull the paper trail at any time.
Investigation Summary
The Office of Defects Investigation (ODI) has become aware of eight vehicle crashes in which a rupture of a Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN) air bag inflator occurred during the deployment of the driver side air bag. All eight drivers in these crashes sustained serious or fatal injuries that appear linked to the ruptures. Six of those drivers sustained fatal injuries and two sustained severe injuries. In all eight incidents, the subject inflators had been installed as replacement equipment after the vehicle was involved in a previous crash. Information gathered during NHTSA’s initial analysis of these incidents indicates that the inflators were potentially imported illegally into the United States. In conjunction with this safety investigation, NHTSA is also working with appropriate authorities to address any illegal activities associated with the importation of these inflators. As a result of the significant safety concerns relating to these inflators, as well as extensive information already obtained by ODI relating to their field ruptures, ODI is moving directly to the Engineering Analysis (EA) stage of its investigative process rather than first opening a Preliminary Evaluation. NHTSA has taken a variety of actions to address the risks posed by the importation of substandard or counterfeit air bag components. However, until recently, these risks appeared spread across a variety of components and manufacturers. As part of ODI’s continuous monitoring of this issue, the agency has obtained information to suggest that at least eight incidents involve ruptures of inflators manufactured by DTN. In parallel with this dedicated investigation into DTN inflators, ODI will continue to monitor reports of field incidents to evaluate risks from other substandard imported air bag components. In 2012, ODI first became aware of substandard or counterfeit air bag modules sold through online marketplaces, such as auction sites. NHTSA obtained examp
About This Investigation Type
An Engineering Analysis (EA) is the in-depth phase following a Preliminary Evaluation. NHTSA engineers conduct testing, collect data from manufacturers, and perform detailed technical analysis to determine whether a safety defect exists. An EA may lead to a voluntary recall by the manufacturer or, in rare cases, a mandatory recall order.
Data from NHTSA Office of Defects Investigation. Cross-references: NHTSA recall campaign API and NHTSA FARS where fatality records overlap. PlainCars does not rate or recommend vehicles. Learn more.
Read our methodology — how this data is sourced, computed, and verified.