Investigations
ACCELERATOR PEDAL INTERFERENCE
NHTSA Engineering Analysis EA05014 — closed, opened 2005-09-13 and involving the FORD MUSTANG COBRA.
NHTSA investigation EA05014 is a Engineering Analysis opened on 2005-09-13 and currently closed. The subject of record is FORD MUSTANG COBRA, which places this file inside the Office of Defects Investigation queue for FORD. Latest activity on this investigation was logged on 2006-04-10 — NHTSA updates that field whenever an Information Request goes out, a supplement is filed, or a status change is recorded in the public docket.
An Engineering Analysis like EA05014 is the deeper technical phase that follows a PE. NHTSA requests design, warranty, and field-failure data from the manufacturer, conducts its own testing when needed, and determines whether the evidence supports a safety defect finding that would compel a recall.
Investigators summarized the matter as follows: "ON APRIL 3, 2006, FORD MOTOR COMPANY SUBMITTED A DEFECT INFORMATION REPORT TO NHTSA CONCERNING A DEFECT CONDITION THAT COULD RESULT IN INTERFERENCE BETWEEN THE ACCELERATOR PEDAL AND FLOOR CARPETING IN APPROXIMATELY 19,14..." Investigations are the early-warning layer of the federal auto-safety system, sitting upstream of formal recalls and defect orders. Whether this one closes without action or escalates into an Engineering Analysis, the full history stays in the ODI archive so researchers, litigators, and buyers can pull the paper trail at any time. Related FORD files, listed below, give context on whether this is an isolated concern or part of a broader pattern across the brand.
Investigation Summary
ON APRIL 3, 2006, FORD MOTOR COMPANY SUBMITTED A DEFECT INFORMATION REPORT TO NHTSA CONCERNING A DEFECT CONDITION THAT COULD RESULT IN INTERFERENCE BETWEEN THE ACCELERATOR PEDAL AND FLOOR CARPETING IN APPROXIMATELY 19,140 MODEL YEAR 2003 AND 2004 MUSTANG COBRA VEHICLES (FORD RECALL NO. 06S43/NHTSA RECALL 06V-108, COPY ATTACHED). FORD WILL RECALL THE VEHICLES TO INSTALL A SHIELD BENEATH THE ACCELERATOR PEDAL TO PREVENT THE PIVOT PIN ON THE REAR SURFACE OF THE PEDAL FROM COMING INTO CONTACT WITH THE FLOOR CARPETING DURING HEAVY THROTTLE APPLICATION. IN THOSE VEHICLES WHERE THE FLOOR CARPETING DOES NOT FIT FLUSH WITH THE SHEET METAL, THE UNIQUE REAR SURFACE PROFILE OF THE MUSTANG COBRA PEDAL MAY ALLOW THE PIVOT PIN OF THE PEDAL TO CATCH IN THE CUTOUT ON THE FLOOR CARPETING BEHIND THE PEDAL, INTERFERING WITH THE PEDAL'S ABILITY TO RETURN; THE RESULT OF WHICH COULD BE UNEXPECTED, CONTINUED THROTTLE APPLICATION. DURING THE ENGINEERING ANALYSIS STAGE OF THE INVESTIGATION, ODI ALSO EXAMINED THE POSSIBLITY OF THE SAME PHENOMENA OCCURING IN NON-COBRA MUSTANGS. HOWEVER, THE DIFFERENT DESIGN OF THE ACCELERATOR PEDALS ON THE NON-COBRA MUSTANGS RESULTS IN SIGNIFICANT DIFFERENCES IN THE POTENTIAL CONTACT BETWEEN THE ACCELERATOR PEDAL AND THE CARPETING, WITH THE BASE OF THE PEDAL PAD ACTING TO FORCE THE CARPET AWAY FROM THE PIVOT PIN. THIS ENGINEERING ANALYSIS HAS BEEN CLOSED.
About This Investigation Type
An Engineering Analysis (EA) is the in-depth phase following a Preliminary Evaluation. NHTSA engineers conduct testing, collect data from manufacturers, and perform detailed technical analysis to determine whether a safety defect exists. An EA may lead to a voluntary recall by the manufacturer or, in rare cases, a mandatory recall order.
Other FORD Investigations
Unintended Transmission Downshift and Rear Wheel Lock-up
Timing Belt Failure
Underbody shields detachment
B-Pillar Trim Detachment
Unintended Transmission Downshift and Rear Wheel Lock-up
Data from NHTSA Office of Defects Investigation. Cross-references: NHTSA recall campaign API and NHTSA FARS where fatality records overlap. PlainCars does not rate or recommend vehicles. Learn more.
Read our methodology — how this data is sourced, computed, and verified.